Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Fuel Stuff > Fuel pump banjo fiittings

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Fuel pump banjo fiittings  Rate Topic 
AuthorPost
 Posted: 06-03-2009 03:58 am
  PM Quote Reply
1st Post
dixiedog
Member
 

Joined: 04-01-2009
Location:  
Posts: 5
Status: 
Offline
I put in the new replacement fuel pump from Delta and the banjo connections are spewing fuel everywhere. Anybody else have this problem ? Are there any 90 degree fittings available for these pumps to eliminate my problem ? Just anoher pause in the road of getting 16617 back on the pavement.

Back To Top PM Quote Reply  

 Posted: 06-03-2009 10:01 pm
  PM Quote Reply
2nd Post
Jim Ketcham
Member
 

Joined: 03-13-2005
Location: Salt Point, New York USA
Posts: 208
Status: 
Offline
What type pump was it?  The banjo fittings and banjo bolts are for the original SU and require fiber sealing washers or for the later SU (with the lip on the pump housing) O rings on the pump side of the fitting.

If you replaced it with a solidstate Facet pump (what Delta used to sell) then you cannot use the banjos but use NPT fittings that you can pick up at your local hardware store.

Jim

Back To Top PM Quote Reply

 Posted: 06-04-2009 04:53 am
  PM Quote Reply
3rd Post
dixiedog
Member
 

Joined: 04-01-2009
Location:  
Posts: 5
Status: 
Offline
It's the new SU pump so I got a couple of o-rings to fit nicely and the problem looks to be solved. Onward and upward to the big start-up soon. Thanks. Steve

Back To Top PM Quote Reply  

Current time is 06:45 am  
> Jensen Healey & Jensen GT Tech > Fuel Stuff > Fuel pump banjo fiittings Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems