Home 
> Jensen Healey & Jensen GT Tech > Suspension > DMS front sway bar...

 Moderated by: Greg Fletcher  
AuthorPost
dixiedog
Member
 

Joined: 04-01-2009
Location:  
Posts: 5
Status: 
Offline
Anybody know what the two angle brackets are for in the hardware package from DMS ? My sway bar forward links seem to interfere with the a-arms when they hang down...sway bar isn't mounted yet.

Jensenman
Member
 

Joined: 04-14-2005
Location: Columbia, South Carolina USA
Posts: 156
Status: 
Offline
Not all cars had the mount points for the links welded to the control arms, so those are included just in case. As far as the links interfering with the control arms, ? Mine worked fine. I did discover that due to differences in manufacturing tolerances my cars are each different, the early '74 has the frame rail upward bends closer to the crossmember than the late '74.

Last edited on 04-23-2009 02:14 pm by Jensenman



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems