Home 

 Moderated by: Greg Fletcher  
AuthorPost
Tim Knowlton
Member
 

Joined: 03-17-2005
Location: Marblehead, Massachusetts USA
Posts: 33
Status: 
Offline
Can anyone give me the pros and cons regarding adjustable cam gears. My cams are stock and am running Dellortto 40's carburators. By using these what is my performance mpact going to be in low vs. high rpm ranges and what suggestions would you have regarding the cam timing. Also where can I purchase them and are there different manufactures and is one better than the other. As always i appreciate the feed back.

Tim knowlton 

Jensen Healey
Super Moderator


Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline

If you have a custom cam profile (or are racing) and want to fine tune then it's a valuable item. For stock cams, there is no use for variable pulleys because the factory already did the tuning work for you.

If you switch cams to another factory option (107, or 104) you will want to use the 104 pulleys available at JAE or the other usual suspects..

Read more about the complexity of engine and cam timing at http://www.elgincams.com

Lucky for us Lotus did another 20 years of engine development after the JH and all we have to do is bolt-on the parts!

Just throw in some 107 cams with 104 pulleys and enjoy the car. You can't get the maximum benefit from 104 cams with the stock 8.5:1 bottom end.

If you have more money then go to the 2.2 crank and 11:1 pistons with 104 cams and 200 HP.

Kurt



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems