Home 

 Moderated by: Greg Fletcher  
AuthorPost
LambandAndy
Member


Joined: 10-21-2005
Location: Eastanollee, Georgia USA
Posts: 72
Status: 
Offline
I've noted since I redid my suspension that I get a whirring noise from the rear end when I let off the gas, none when accelerating.  My memory says that this was there before I did all the work but not as prevalent (maybe because all the other noises from the suspension have disappeared now).

I did disassemble and clean the rear end and was very careful to put all spacers etc. back in the same place, but this could be a gear meshing problem.

Just wondering if anyone else had any ideas before I yank the rear axle back out.  The manual gets quite complicated in setting up all the torques and clearances.  Anyone else done it?  Is the "crushable" spacer still available?

Appreciate any help.

Andy

#15223



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems