Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
5 Speed Gear Lube  Rate Topic 
AuthorPost
 Posted: 04-30-2008 03:25 pm
  PM Quote Reply
1st Post
Lash Russell
Member


Joined: 07-23-2005
Location: Franktown, Colorado USA
Posts: 69
Status: 
Offline
Hello all,

     After I did a five speed (Getrag) conversion I started running with 75-90 weight lube but found the shift up to second could be a little crunchy at times.  I am now trying 20-50 and shift up to 2nd is fine but down to first requires incredible timing to get right without grinding.  20-50, I'm sure to nobody's surprise, is a little louder.  Has anybody had good luck with different weights/synthetics/additives etc in keeping the Getrag happy with a long life?

Thanks,

Lash

 

 

Back To Top PM Quote Reply  

 Posted: 04-30-2008 03:30 pm
  PM Quote Reply
2nd Post
Brett Gibson JH5 20497
Member
 

Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 798
Status: 
Offline
Synthetic 75-90 works well in my 5 speed box.

Back To Top PM Quote Reply

 Posted: 04-30-2008 04:14 pm
  PM Quote Reply
3rd Post
Greg Fletcher
Administrator


Joined: 03-11-2005
Location: Lake Nacimiento, California USA
Posts: 430
Status: 
Offline
Ditto what Brett said. The 20W 50 engine oil is fine for the thrasher 4 speed (it's recommended for that), but I would never use that in the Getrag. Parts for those are unobtainium now and you will benefit from a high quality, synthetic GEAR oil of the recommend weight.

Back To Top PM Quote Reply  

 Posted: 04-30-2008 05:02 pm
  PM Quote Reply
4th Post
Lash Russell
Member


Joined: 07-23-2005
Location: Franktown, Colorado USA
Posts: 69
Status: 
Offline
Thanks Brett and Greg,

     This makes sense and I'll switch out to the synthetic 75-90.  The reason I even tried the 20-50 was from a service bulliten that mentioned 20-50 was safe but loud, glad I asked.

Lash

Back To Top PM Quote Reply

 Posted: 05-01-2008 12:17 am
  PM Quote Reply
5th Post
Lash Russell
Member


Joined: 07-23-2005
Location: Franktown, Colorado USA
Posts: 69
Status: 
Offline
UPDATE,

     Mobil 1 Synthetic 75-90 put in, works great.  A little quieter than 20-50 and able to manage all gears "crunchless" as long as I'm not too agressive.

Lash

Back To Top PM Quote Reply  

 Posted: 11-19-2015 10:28 am
  PM Quote Reply
6th Post
UKJames
Member
 

Joined: 04-24-2014
Location: Berkshire, United Kingdom
Posts: 43
Status: 
Offline
Reading this old post- I've got a 4 speed with a slight crunch into 4th- The box was refurbed recently but the previous owner installed, so not sure what oil he used. Sounds like the synchro might be slipping because the oil weight is wrong? Has anyone got a recommendation on the best make and weight of oil for the 4 speed box?

Thanks-

Jim

Back To Top PM Quote Reply

 Posted: 01-17-2016 03:20 am
  PM Quote Reply
7th Post
dbeliveau74
Member


Joined: 12-28-2015
Location: Manchester, New Hampshire USA
Posts: 53
Status: 
Offline
Above Greg states:
Ditto what Brett said. The 20W 50 engine oil is fine for the thrasher 4 speed (it's recommended for that), but I would never use that in the Getrag. Parts for those are unobtainium now and you will benefit from a high quality, synthetic GEAR oil of the recommend weight.

Back To Top PM Quote Reply  

Current time is 06:50 am  
> Jensen Healey & Jensen GT Tech > Engine & Transmission > 5 Speed Gear Lube Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems