Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Electrical & Instruments > New Tach-Accel Ignition System

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
New Tach-Accel Ignition System  Rate Topic 
AuthorPost
 Posted: 03-14-2008 05:46 pm
  PM Quote Reply
1st Post
12371
Member
 

Joined: 09-22-2006
Location:  
Posts: 17
Status: 
Offline
I've sent my speedo and tach to nisonger instruments for rebuilding.  Luckily I read that the only electric ignition system that they can calabrate to is a Petronix.  I've purchased a "classic" replacment tach which is very similar to the original but I'm not sure of the connection.  The car has the standard Green, black, white and white/slate.

The Nisonger instructions show:
Green:  fused power source
Black:  Metal ground
Brown/Grey: Trim off, not used
Red/White:  Light harness
White: only for electronic ignition-Connect to tach prot of ignition module.  Do not connect to a tach adaptor box.

Long story short.  I'm assuming green to green but anyone know which lead the "white" on the new tach goes to.  White/Slate or plain White?

Please add any relevent info.

Back To Top PM Quote Reply  

Current time is 08:09 am  
> Jensen Healey & Jensen GT Tech > Electrical & Instruments > New Tach-Accel Ignition System Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems