| Moderated by: Greg Fletcher | ||
| Author | Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
redracer Member
|
I often get asked for replacement keys for both the ignition and the other one(doors, trunk, glove box), so here's a small list of aftermarket replacements. IGNITION: Taylor X16; Ilco X50 AA3 DOORS/TRUNK/GLOVE BOX: Taylor X3 and X16 (again with the end cut down about 3/16"); Ilco 62FT F68YT Hope this helps, bruce |
|||||||||
|
yostra Member
|
FYI If you want a plastic head ignition key, Moss Motors has British Leyland ignition keys available - the "MG" series works for the JH. It It just has the BL swirl on the head, not MG. |
|||||||||
|
redracer Member
|
Thanks for that info; If anyone has any other key makers that will work for our cars, please post that, as I am sure that will help many who just get one of our cars and need to make duplicates. |
|||||||||
|
twincam69 Member
|
Does anyone know the key type for the GT glove box and trunk locker? It’s a small one sided key. |
|||||||||