| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| alternative air cleaner | Rate Topic |
| Author | Post |
|---|
| Posted: 05-27-2017 09:20 pm |
|
1st Post |
|
allstateguy Member 
|
Never liked the look of the stock airbox (too Hooverish) and I didn't like the look of the K&Ns that the car came to me with. So I grabbed some spare aluminum sheet, some 5/16-18 button head screws, some trim, and a Subaru element from RockAuto and voila, for about $50 and a couple hours of time, I ended up with this . . . Attachment: new air cleaner 2 5-26-17 small.jpg (Downloaded 119 times)
|
||||||||||||||
| |||||||||||||||
| Posted: 05-27-2017 09:28 pm |
|
2nd Post |
|
allstateguy Member
|
don't know why I couldn't put two pix on the post, but here's the other one Attachment: new air cleaner set up 1.jpg (Downloaded 116 times)
|
|||||||||||||
| ||||||||||||||
| Posted: 05-27-2017 11:40 pm |
|
3rd Post |
|
redracer Member
|
Looks nice; just wondering why the carb. tops are 90 degrees from where they would normally be?
|
||||||||||||||
| |||||||||||||||
| Posted: 05-28-2017 12:46 am |
|
4th Post |
|
allstateguy Member
|
I've only had the car for a few months and they were on it that way before I rebuilt them. I looked inside and didn't see how that position made a difference. The diaphragm tab is in the slot of the body.
|
|||||||||||||
| ||||||||||||||
| Posted: 05-28-2017 12:58 am |
|
5th Post |
|
redracer Member
|
If you pull the top off you will notice the 2 holes in the bottom of the piston; if they are closest to the butterfly, the response time for acceleration will be faster. You can "live" with the orientation in any of the 4 positions, but the response time (greatest "vacuum" or pressure differential) will be quickest in the 2 holes to the rear of the opening.
|
||||||||||||||
| |||||||||||||||
| Posted: 05-28-2017 01:00 am |
|
6th Post |
|
allstateguy Member
|
Thank you! As I was going to put in new needles tomorrow, I will put them back on in the correct direction.
|
|||||||||||||
| ||||||||||||||
| Posted: 04-26-2025 05:44 pm |
|
7th Post |
|
ptroot Member
|
I've been trying to track down a filter for a 73 Jensen Healey I just became caretaker for (I don't own it). Is this setup using the stock plate connecting to the ZS carbs? And you made the outside plate? Do you have the part number for the Subaru filter? Rock Auto knows me well, but still wants more from me.
|
||||||||||||||
| |||||||||||||||
| Current time is 09:56 pm | |
| > Jensen Healey & Jensen GT Tech > Carburetors > alternative air cleaner | Top |
