View single post by Ron Mau
 Posted: 10-18-2010 09:55 pm
PM Quote Reply Full Topic
Ron Mau


Joined: 03-14-2005
Location: Davenport, Iowa USA
Posts: 61
Is it actually the bolt? The tightening nut will come out of the block with the bearings and the tensioner. If teh stud it self is come out you can try to tighten it with a jam nut or it may need to be helicoiled or retapped. Worse case scenerio. Call if you need to 563-322-2854



Ron Mau