View single post by subwoofer
 Posted: 09-07-2010 10:33 pm
PM Quote Reply Full Topic


Joined: 04-01-2008
Location: Sandefjord, Norway
Posts: 583
Measured the caliper I had off the car today, here are the numbers:

Lug distance: 82mm (3.25")
Lug-to-disk: 20mm
Mount height: 68mm to outer edge of piston
Pad size: 60mm x 49mm

I am beginning to think that the M14 mount will actually fit. Now we need to figure out a way to get a vented disc on there.

Not to mention how to get rear disc brakes on there with as few machined parts as humanly possible.