View single post by pbahr
 Posted: 05-09-2010 02:27 am
PM Quote Reply Full Topic
pbahr



Joined: 04-15-2005
Location: Moorestown, New Jersey USA
Posts: 198
Status: 
Offline
You can pull the bellhousing off and get to the rear of the engine - problem is that you will have to jury rig a support for the rear of the engine or it will just hang on the front engine mounts.  Just putting a block under the pan won't work, cause you will need to remove the pan to look for the problem.  Don't forget to remove the tailpipe from the header..........

YELODOG