View single post by Art DeKneef
 Posted: 05-03-2010 05:31 am
PM Quote Reply Full Topic
Art DeKneef

 

Joined: 03-12-2005
Location: Mesa, Arizona USA
Posts: 338
Status: 
Offline
 Jim, Thanks for the push in the right direction. I saw the two outer circlips for the brake pedal right away. It was the other two shafts that I had the problem with. What I thought were thin edges to the end of a spacer tube were the other circlips. Once I removed two from each shaft it was a little easier removing the shafts.

I'm not sure if these shafts are the same for both the Healeys and GTs since the workshop manual doesn't indicate one way or another. But since this pedal box came from the now deceased GT I got each of the shafts had serrated lines on one side that helped them stay attached to the pedal box. It took some ummm..persuasion with the hammer and a drift to get them out. Once those ends were loose the shafts did come out fairly easy.

Thanks again for the help.