View single post by jdenglish
 Posted: 04-12-2010 03:41 pm
PM Quote Reply Full Topic
jdenglish

 

Joined: 02-11-2009
Location:  
Posts: 80
Status: 
Offline
 The oil cooler and sandwich plate use 5/8-BSP (5/8 British Standard Pipe) fittings. I re-plumbed all the oil lines with AN8 fittings and Aeroquip hose which of course necessitated a new cooler.  There did not seem to be any way to adapt the them to each other.  13-row oil coolers with AN8 or AN10 fittings are widely available on Ebay.