View single post by subwoofer
 Posted: 03-28-2010 12:54 pm
PM Quote Reply Full Topic
subwoofer

 

Joined: 04-01-2008
Location: Sandefjord, Norway
Posts: 617
Status: 
Offline
 Got it. Used a pipe for leverage, pressing down on the front left corner of the oil pan and using one of the bellhousing mounts as a counterhold. Took quite a bit of force, but I figured that as long as force wasn't applied in form of a shock or blow, material strength should be more than high enough.

Now only remains to modify the baffles, since the Eclat pickup is 2" further back than the JH pickup - so it interferes with the JH baffles. Swapping pickups means having to do quite a bit of work over again - in addition to waiting for parts.

--
Joachim