View single post by Mark Rosenbaum
 Posted: 06-16-2005 02:44 pm
PM Quote Reply Full Topic
Mark Rosenbaum



Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
 There's a trick which is often of use.  Before pulling the cable through the firewall, tie a 6-foot-long string to the engine end of the cable.  Untie this string after the cable is through the firewall and before removing the cable and heater console from the car.  When reinstalling things, re-tie the string to the cable, and use the string to pull the cable into the engine bay.