View single post by Jensen Healey
 Posted: 12-21-2009 10:15 pm
PM Quote Reply Full Topic
Jensen Healey



Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
 The key to any airbox is to make sure there's room for the velocity stacks you are going to use. Add a minimum of 1" to the length of the stack for smooth air flow. 

Short stacks = more HP, long stacks = more torque. Any stack is better than no stack.

I made a extended fiberglass inner half so the 1 5/8" stacks would fit. The breather hose goes into it through a filter fitting I found at Kragen. The carbon canister tube also just connects to the airbox.

Kurt

Last edited on 12-22-2009 01:20 am by Jensen Healey