12371
| Joined: | 09-22-2006 |
| Location: | |
| Posts: | 17 |
| Status: |
Offline
|
|
Greetings! I was having trouble getting a good spark to the plugs. I was convenienced that my Crane HEI was out of phase so I sent it to Advanced for a rebuild. On reassembly it went back in without a lot of swearing and I thought my troubles were over. When I was cranking it to do the timimg, smoke was visible from under the hood. After a second round of cranking I found the culprit wire in the bundle coming out under the fuse box on the firewall. It is ( I believe) a white/slate wire but for the life of me I can't find it on my wiring diagram. Any ideas where it came from or where it goes?
|
