View single post by Dakota123
 Posted: 07-09-2009 02:58 pm
PM Quote Reply Full Topic
Dakota123

 

Joined: 03-20-2009
Location: Colorado USA
Posts: 185
Status: 
Offline
A tip for improving the damper oil seal of the jet adjuster screw -- even after replacing the o-rings in mine, I couldn't keep oil in the dampers for more than a couple of days.  I cut one finger off of a nitrile (otherwise known as buna-N) exam glove and cut off the tip, so that a small sleave is left.  I inserted that and the adjuster into the bore and voila, two weeks with no loss of oil at all.  Nitrile is oil-resistant so I'm hoping these hold up for some time to come...