View single post by JodyKerr
 Posted: 07-02-2009 01:42 am
PM Quote Reply Full Topic
JodyKerr



Joined: 05-15-2006
Location: Tempe, Arizona USA
Posts: 217
Status: 
Offline
 Steve and I just did the same thing on his JH 4-speed.

The trick is to get the snap ring started and use a coulpe small screw drivers as shims to keep it from dropping back into the track.

It requires a little patience, but isn't that hard. We did it with two small screwdrivers and a set of ring pliers from Harbor Freight.