View single post by JHRV8
 Posted: 05-08-2009 09:40 pm
PM Quote Reply Full Topic
JHRV8

 

Joined: 01-03-2008
Location:  
Posts: 40
Status: 
Offline
The adapter I used was from Grant and is available in any auto parts store.   The column collar was made on the lathe and the wheel is a Monolita adapted to the Grant spline adapter with an aluminum spacer.  This is useable for any type of wheel with a 3,5,6,etc. bolt pattern.........Regards, JHRV8. 

Last edited on 05-08-2009 09:42 pm by JHRV8