 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 03-11-2005 |
| Location: | San Anselmo, California USA |
| Posts: | 983 |
| Status: |
Offline
|
With the MSD unit phasing problems quickly lead to tracking in the cap and burned through rotors.
Kurt
| View single post by Jensen Healey | |||||||||||||
| Posted: 04-09-2009 02:25 pm |
|
||||||||||||
Jensen Healey
|
To set the phasing I used an old cap and drilled holes on either side of the #1 tower. Then used a timing light to look at the rotor while it operates. I had to redrill my Pertronix unit so it could be adjusted enough. With the MSD unit phasing problems quickly lead to tracking in the cap and burned through rotors. Kurt
|
||||||||||||
|
| |||||||||||||