View single post by Art DeKneef
 Posted: 03-26-2009 12:22 am
PM Quote Reply Full Topic
Art DeKneef

 

Joined: 03-12-2005
Location: Mesa, Arizona USA
Posts: 338
Status: 
Offline
 Here's a picture of one I just took off an engine I am going to rebuild. The top is about 1/16 to 1/8 inch from the top.

This engine was in unknown state as I started to take it apart. It wouldn't turn, intake manifold was off and very dirty and oily. After removing the head found three cylinders with what looked like cat litter/coarse sand mixed in them. I doubt the engine would have done anything if I decided to try and start it.

Art

Attachment: DCP_0014[1].JPG (Downloaded 59 times)