View single post by Jim Ketcham
 Posted: 03-05-2009 08:10 pm
PM Quote Reply Full Topic
Jim Ketcham

 

Joined: 03-13-2005
Location: Salt Point, New York USA
Posts: 208
Status: 
Offline
John,

I found alignment using the Conversion Components bell housing to be fine.  I modified an old rear mounting bracket instead of using Conversion Components and found that a better fit.  I also extended the shifter linkage and housing about another 15 mm more than the recommended housing for a better fit.  I will try to attach a diagram of my measurements with the Supra vs the JH 4 speed.  I also found an 80s Toyota Corolla speedo cable worked perfectly.  Speedo is off ~2 mph at 50 mph.

Jim

Attachment: JH transmission.jpg (Downloaded 194 times)

Last edited on 01-21-2018 11:09 pm by Jim Ketcham