View single post by Gary Martin JH 15371
 Posted: 03-02-2009 11:15 pm
PM Quote Reply Full Topic
Gary Martin JH 15371

 

Joined: 03-12-2005
Location: Portland, OR
Posts: 98
Status: 
Offline
 My left front upper control arm is loose. I had thought the bushings were worn out. I just removed the long mounting bolt and removed the control arm. The bushings are intact. The problem is that the long bolt is worn and is loose in the tube that goes through the cross member. I have another bolt that is less worn, but it is still loose in the cross member tube. It looks to me like the tube in the cross member is worn. Has anyone run into this problem, and how can it be fixed?

Gary