| View single post by colinw59 | |||||||||||||
| Posted: 02-18-2009 02:55 pm |
|
||||||||||||
colinw59
|
On 15851 I had to replace this, now obsolete, connector. As the original was damaged and far from the show condition that I needed. And as you say, of dubious design. So I used a high quality terminal block, fixed to the inner right fender. All power was then routed through this. The good thing is that should I need power for someting else down the road, I can tap into this terminal block as there are free connections. I'd love to post a close-up pic, but I can't as the car is out getting some seat repair. The terminal block is visible in this pic though. http://jhppg.com/gallery/74-Jensen-Healey-15851/2006_0404_3 Good luck, Colin
|
||||||||||||
|
| |||||||||||||
