View single post by Jensen Healey
 Posted: 10-26-2008 02:05 pm
PM Quote Reply Full Topic
Jensen Healey



Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 976
Status: 
Offline
Hi Joachim,
Since no oxygen sensors were in general use when the JH was built tuning was done using Co readings. The manual states 1.2 - 2% Co at idle for the 4 speed and .2 - .3 % for the 5 speed as emissions were further regulated, (sounds kind of lean).


Judson has used exhaust gas temperature readings to tune Dellortos.

I prefer the seat of the pants method.

Kurt