JHRV8
| Joined: | 01-03-2008 |
| Location: | |
| Posts: | 40 |
| Status: |
Offline
|
|
Indeed! Why would you want to replace the column? There is very little room for a more robust column, and the stock piece is fine; just replace the bottom bushing(made my own from oilite bronze on the lathe) and the upper bushing(carved from teflon) and your good to go for the forseeable future. I also used honda column switches, and modified the horn circut to work the center button, added a nice wheel and....done. Much easier than adapting another column. Regards: Bob
|
