View single post by pbahr
 Posted: 08-10-2008 02:58 pm
PM Quote Reply Full Topic

Joined: 04-15-2005
Location: Moorestown, New Jersey USA
Posts: 198
Don't consider the grease vs oil issue lightly !

During some conversations on the subject of R/P lubrication, I happend to think about the use of grease.  While it might lubricate the Rack and Pinion gears, it will NOT flow to the two Heim (inner tie rod) joints.  Seems from lots of posts and the email list, this is where many problems occur.

IMHO, do NOT use grease.