View single post by Brett Gibson JH5 20497
 Posted: 06-24-2008 11:28 am
PM Quote Reply Full Topic
Brett Gibson JH5 20497

 

Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 798
Status: 
Offline
 The numbers I was given and believe Greg recommends are,

Choke 33, Main jet 145, MJ emulsion tube 7772.5, MJ air correction jet 190, Idle jet 55, Idle jet holder 7850.7, pump jet 45, cold start jet 70, CS emulsion tube 7482.1, Float assembly 7298.2, Butterfly's 7481.2,

This is what I'm running also along with the anti-popping flanges on a stock engine with the cams 110 to 110, seem's to run a tad rich with a bit of hesitation if I tromp on the gas pedal, if I play the pedal works just fine, top end speed is great with no breaking up smooth all the way.

Brett