View single post by pbahr
 Posted: 06-03-2008 04:20 am
PM Quote Reply Full Topic
pbahr



Joined: 04-15-2005
Location: Phoenixville, Pennsylvania USA
Posts: 202
Status: 
Offline
 I just replace the Gaiter on the R/P assembly, and added 1/3 pint of SAE 90 oil by shoving a piece of small diameter hose under the small diameter of the Gaiter.  Shoved it in far enough to reach the gears.

I used a MyteVac (sp?), filling the cup with proper amount of lube and connected the pressure output (not the vacuum) to the Gaiter.  Took about 10 minutes and I was all done and cleaned up.

YELODOG