View single post by Stevewarbs
 Posted: 04-11-2008 07:41 am
PM Quote Reply Full Topic


Joined: 04-10-2008
Posts: 3
When I bought a service kit for mine there were loads of O-rings with no way of knowing what they were for so I emailed Matt at Eurocarb and I have posted his reponse below. HTH

6 x internal dia approx 5mm 4 for idle jet holders, 2 for pump
non return valves

2 x internal dia approx 4mm think you should have 4 of these
for your mixture screws - I will send another two today, sorry!

4 x internal dia approx 3mm pump jets

4 x intern dia approx 2mm you won't use these - they are for a
later carb.