View single post by Greg Fletcher
 Posted: 03-10-2008 03:51 pm
PM Quote Reply Full Topic
Greg Fletcher



Joined: 03-11-2005
Location: Lake Nacimiento, California USA
Posts: 430
Status: 
Offline
 People often forget this, but it is super important that when your knowledgeable and experienced machine shop is doing the work on your head, they should have the camshafts in the cam towers in front of them as well or they have no way of matching the valve length to the correct shim range (which should generally be in the 0.070's). They will simply ignore this essential fact and hand over the finished head to you and now the problem of shims being out of range is now your problem!