| View single post by flatlanderep | |||||||||||||
| Posted: 11-27-2007 01:44 am |
|
||||||||||||
flatlanderep
|
OK, I have been out of town for TK and after work today, I tried to get my JH going. Right next to the battery, there is a wiring harness. For the solenoid, there are 3 heavy black wires and one brown wire. One of the black wires goes to the negative battery terminal and I connected this one and the brown one to the solenoid post on the passenger side. This left me with 2 heavy black wires and I connected these 2 to the other solenoid post. I wire brushed all connections, washers, battery terminals and the grounds to passenger side body. I connected the red white wire to the the blade connector located on the passenger side of the solenoid and the white-yellow to the other blade connector. When I tried to connect the positive battery cable to the battery post, I got a spark and the starter turned. So this is still not correct and I need help. Anyone out there with a similar set-up? Flatlander
|
||||||||||||
|
| |||||||||||||
