View single post by pbahr
 Posted: 11-06-2007 04:08 am
Full Topic
pbahr



Joined: 04-15-2005
Location: Moorestown, New Jersey USA
Posts: 198
Status: 
Offline
Erik (HARKES)

I just got to read this thread and noted some discussion about using POR Gas Tank sealer.  I'm pretty sure I used the POR product when I did my Tank  in 1991 -white stuff it was.  Well, after 16 years, it's still good as new.  I check it every couple of years by using a flashlight (torch) to look into the top of the Tank.  No worries, no problem.

Used the black POR to coat the outside, and supported the Tank on a couple of strips of solid rubber.

The trick, as in most applications of coating or paint like this, is proper PREPARATION of the item to be coated.

Pete Bahr (YELODOG)