View single post by Mark Rosenbaum
 Posted: 06-04-2007 03:28 am
PM Quote Reply Full Topic
Mark Rosenbaum



Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
 See http://jhppg.com/gallery/album76/DSC00013 for a photo of what I did on my car.  The fittings are all standard nylon bits from the local hardware store, the bushings are cheap aftermarket parts (now rotting), the hoses are quality fuel hose, and a brass reducer (offscreen, not shown) mates the fuel hose to the hose running from the crankcase vent spigot.  It isn't elegant, but it does work.