View single post by Tom Thomson
 Posted: 04-29-2007 01:49 am
PM Quote Reply Full Topic
Tom Thomson

 

Joined: 03-18-2005
Location:  
Posts: 33
Status: 
Offline
 Some time back I posted a complaint abt 13753 being hard to start.  Once started, it ran great.  Turns out to be a very simple problem with an easy fix and I'll bet other cars suffer from the same malady.  Something has come adrift either in the ign switch or the wiring and the coil was never seeing 12V on start.  The ballast resistor was in the circuit all the time.  A jumper from batt pos to coil pos with a pushbutton will vanquish this demon.  Starting now becomes a two handed procedure but I think with practice I can master it.

                                Tom 13753