View single post by John Kimbrough
 Posted: 04-25-2007 12:35 pm
PM Quote Reply Full Topic
John Kimbrough

 

Joined: 03-12-2005
Location: Washington USA
Posts: 116
Status: 
Offline
 I understand your frustration.  When I put in my Pertronix ignitor and coil, I felt the same way.  You might want to take a look at my web site which chronicles my installation.  It may give you some clues.  One thing I had to do is increase the spark plug gap in order to get a good spark, and to get all cylinders firing, but I had put in a high tension coil at the same time.  John.

http://home.comcast.net/~jrkengr2/