View single post by colinw59
 Posted: 01-30-2007 04:30 pm
PM Quote Reply Full Topic
colinw59



Joined: 02-14-2006
Location: Bloomfield/Hebron, Connecticut USA
Posts: 147
Status: 
Offline
 IIRC the push retainers for the plastic hinges have a small tapered pin in the centre that must be pushed in (or pulled out, can't remeber which) to release the retainers grip on the through hole in the bulkhead. Very fiddley, probable a tad brittle and a little difficult to get to. Good luck Colin