View single post by Mark Rosenbaum
 Posted: 11-20-2006 01:42 am
PM Quote Reply Full Topic
Mark Rosenbaum



Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
 Here's a photo I just took. This applies to engines #2760 and up (earlier engines are similar but IIRC the pulley mark is on the front face).  Sometimes the mark on the pulley gets filled with grime, and when that occurs degreasing is in order.

In the photo, the timing is about 4° BTDC.  The pointers are at 10° increments so the left-hand one is 30° BTDC.

Attachment: timing marks - late engines.jpg (Downloaded 68 times)