View single post by Jim Ketcham
 Posted: 11-06-2006 03:11 pm
PM Quote Reply Full Topic
Jim Ketcham

 

Joined: 03-13-2005
Location: Salt Point, New York USA
Posts: 208
Status: 
Offline
Thanks Brett.  It appears there are at least three types of tensioners.  The original, with two bearings that required the "special wrench" to slip behind the pulley to adjust.  The next generation, with 2 bearings that allowed adjustment from the front.  The latest, single bearing (non-replaceable bearing?) that adjusts from the front.  Sounds to me like the second generation one with the replaceable bearings and the easy adjustment is preferable.

Jim