View single post by Mark Rosenbaum
 Posted: 09-18-2006 10:36 pm
PM Quote Reply Full Topic
Mark Rosenbaum

Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
You can find a drawing showing the correct vacuum line hookups, excluding the anti-runon system, at  .  This is based on shop manual figures RM5, RM6, and RM7, as well as a few mentions-in-passing elsewhere in the shop manual.

As far as I know, the only factory information concerning the anti-runon valve, air pump, and cat converter are found in the Emissions chapter of the shop manual. 

The facing tubes on the two carbs are for the start enrichment or "choke" system, and they are indeed supposed to be hooked together as you have done.  I think you will find the car will now start much more easily when the choke is applied.

Good luck getting the car through the smog test.