View single post by Dan Eiland
 Posted: 09-03-2006 05:10 am
PM Quote Reply Full Topic
Dan Eiland


Joined: 03-18-2005
Location: El Paso, Texas USA
Posts: 159
Mark, thanks for the response. Any brands you recommend or stores that carry something I could use. I have a can of Metal to Metal from Evercoat that is used in body work, but I don't think I can use it for this application due to the exposure to fuel. I have heard of products like what you are referring to but have never used one. If someone on the board knows where I might find something please speak up. I think the damage is minor from closer inspection. The largest gouge is along the outer edge and does not seem to be of any concern. There are several deep scratches though, that are directly under the "O" ring. These definitely need to be filled and sanded. Good suggestion Mark. I will do some research to see what I can find. Someone on the Jensen email list mentioned some products that might work. Now if I can just find the email.