View single post by Greg Fletcher
 Posted: 08-21-2006 04:50 pm
PM Quote Reply Full Topic
Greg Fletcher

Joined: 03-11-2005
Location: Lake Nacimiento, California USA
Posts: 421
You'll probably want to spend some time soaking those carb bodies once you have them apart. A sonic cleaning is best, but you can get by with some good quality carb dip. Those passages will be pretty mucked up and heavily varnished from years of sitting around. You might also need to figure some rejetting in your master plan as well since they never seemed to be just right for the engine you're putting them on.