View single post by Pat Connor
 Posted: 08-14-2006 02:49 am
PM Quote Reply Full Topic
Pat Connor



Joined: 03-12-2005
Location: San Dimas, California USA
Posts: 21
Status: 
Offline
For your information  a rear end out of a Chev S10 or GMC Sonoma width wheel flange to wheel flange is 54 inchs the same as the Jensen Healey and comes with either 9.5" x 2" drums or discs.  I am at present installing one in my Jensen- Healey Chev.  The lower control arms can be used with the brackets off the Jensen allowing use of the stock springs and shocks. However the upper arms cannot be used as stock due to the wider and taller Chev casting.  I am at present deciding whether to modify the Jensen upper arms or go to a conventional four link setup and a Panhard rod.