View single post by 10dtom
 Posted: 08-09-2006 10:31 pm
PM Quote Reply Full Topic
10dtom

 

Joined: 08-08-2006
Location:  
Posts: 4
Status: 
Offline
 I did a disassemble and clean on both front calipers, both had slight rust on the pistons, but the seals were good and there was no indication of a problem.

Also, with the bleed valve open the brake pad can be moved easily on both sides of the rotor.

I suspect there is a problem in the pressure diffirential warning actuator. I will try am going to try and bleed pressure back up to it next weekend

will post whatever I find out.

thanks,

tom