View single post by dciaccio
 Posted: 07-29-2006 02:44 am
PM Quote Reply Full Topic


Joined: 07-01-2005
Posts: 17
Mark & Brett:

Well its been a year later and this little problem persists. I completely bled the brake system last weekend and still have the slight brake fade after a slight "click" or "rattle" feel in the pedal at just about a stop.  The master cylinder is a rebuilt TR-6 from Apple Hydraulics and performed fine when first installed. 

Maybe a related question is the pressure differential switch.  I believe this unit has a small valve inside of it that closes off either the front or rear brake circuit in case of major leak/failure upon this true?  Could the small valve inside this unit be the culprit?

What might the next step be?

Thanks again.

Dave Ciaccio

'73 JH #12248