View single post by brino
 Posted: 05-15-2006 12:10 pm
PM Quote Reply Full Topic
brino

 

Joined: 03-12-2005
Location: Keswick, Ontario Canada
Posts: 11
Status: 
Offline
 Hello Norm. I attached the support strut's existing bracket to the inner fender with self tapping sheet metal screws after drilling a couple of small pilot holes. The strut folds nicely along the front of the engine compartment resting on the upper rad hose flange and is stabilized simply with a Velcro strips on the hose clamp and the strut. It works fine and gives excellent access to the engine.

Brian