View single post by John Finch
 Posted: 05-12-2006 09:09 pm
PM Quote Reply Full Topic
John Finch

 

Joined: 08-01-2005
Location: Minneapolis MN
Posts: 122
Status: 
Offline
You could splice the heater core supply and discharge hoses together using  hose barbs and hose clamps. Hardware stores might have brass or stainless double male ends. Not sure of the size required. You could always cut a small portion, say 1", off the longest hose and take it with you. Just remove the existing hoses from the firewall male fittings and splice them together. Completely bypasses the heater core.