View single post by LambandAndy
 Posted: 04-24-2006 12:02 am
PM Quote Reply Full Topic
LambandAndy



Joined: 10-21-2005
Location: Eastanollee, Georgia USA
Posts: 72
Status: 
Offline
 A trick I used to remove the pesky allen heads holding down the seat rails was to cut a 1/4" allen wrench off about an 1-1/4" long and insert it into the screw (so that a 1/4" or so protrudes above the rail), then turn it with a regular 1/4" open end wrench.  A 1/4" ratchet wrench would work even better if you can find one.

Andy

#15223