View single post by Rory Clark
 Posted: 04-04-2005 10:00 pm
PM Quote Reply Full Topic
Rory Clark

 

Joined: 03-13-2005
Location: Okla. City, Oklahoma USA
Posts: 40
Status: 
Offline
 Sorry should have been more specific.

I just finished the rebuild of the carbs. They look GREAT. The needles were a little corroded which a little 600grit took care of. What I mean by won't get out of its own way is: VERY LITTLE acceleration and will not keep speed without down shift going up slight hill. Starting from stop I am the slowest thing going.

I will check the wiring Again. I think it is to lean but not sure how to rich up the mixture do not have tool. The carbs are in very close air intake sync. 

Thanks Rory.